Single Disc High-Performance Clutch (M50, M52, M52TU, M54 and S50)

Single Disc High-Performance Clutch (M50, M52, M52TU, M54 and S50)

from £0.00

A Single-Disc Clutch Set for M-Series and I6 S-Series Engines

Friction Plate:
Flywheel:
Quantity:
Add To Cart

A good supporting modification for any power-gaining engine modifications. This single-disc clutch fits perfectly onto any manual 5-speed ZF and Getrag gearboxes fitted as standard to M50, M52, M52TU and S50 engines (Also see our listing for the S54 engine) and also to 5-speed Getrag boxes mated to M54 engines with a 10x29 spline (crossover year was approximately 06/2002 - check if you are unsure). With a high-quality and long-lasting custom organic (and ceramic mixed - if desired) friction plate and built-to-spec pressure plate, the parts are OEM-quality and have a great feel on the pedal. Everything is built from scratch less than two hours from our workshop and comes with our standard year’s guarantee. The kit can be easily used on daily driver vehicles - just ask our director, Alex! This clutch will hold approximately 540Nm or torque (or more with ceramic options), and is a standard part in our full turbo kits.


  • Chromoly billet for its hard-wearing properties

  • Single-piece ring gear for reliability

  • Flywheel weighs approximately 5.7kg

  • Custom organic friction plate, using a custom high-copper organic blend

  • UK-built pressure plate with high clamping force without a heavier pedal

  • New release bearing included

  • All required bolts are included with the kit

  • Torque settings: Pressure plate to flywheel 27Nm, Flywheel to crank 105Nm (with Loctite)

  • Full after-sales support - as with all of our products as standard

  • Organic: 540Nm

  • Org/Cer Mix: 580Nm

  • Ceramic: 620Nm

  • All maximum torque claims are estimates and depend on many factors, including: Vehicle usage, wear-in period and quality, personal driving styles, weight of vehicle, tyre-to-ground patch, tyre compound, clutch delay valve. We recommend a minimum of 20% headroom from vehicle torque to maximum estimated advertised torque.

  • Before refitting your gearbox shorten the release bearing guide tube by 4mm to increase clearance.


Need someone to fit this part for you? We have a fully-functioning workshop based in the East Midlands, England. Fitting charges start at £216. Contact us for more information or to book!